Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Technician
    Join Date
    Apr 2009
    Location
    Hanoi
    Posts
    24
    Rep Power
    31

    aficio 2060 - Sc 122

    What does its mean sc 122 of Aficio 2060

    anybody help!

  2. #2
    Service Manager 5,000+ Posts
    aficio 2060 - Sc 122


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: aficio 2060 - Sc 122

    This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

    Paul@justmanuals.com

  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Apr 2010
    Location
    the west
    Posts
    662
    Rep Power
    38

    Re: aficio 2060 - Sc 122

    122 D Scanner home position error 3The scanner home position sensordoes not detect the on conditionduring original scanning.
    BCU, SDRB (Scanner Driver Board)defective
    Scanner motor defective
    Harness between BCU, SDRB, scannermotor disconnected
    Scanner HP sensor defective
    Harness between scanner HP sensorand BCU disconnected
    Scanner wire, timing belt, pulley, carriageinstalled incorrectly.

    checked the scanner settings, but this may be fixed by shutting down completely and restarting.

  4. #4
    Technician
    Join Date
    Apr 2009
    Location
    Hanoi
    Posts
    24
    Rep Power
    31

    Re: aficio 2060 - Sc 122

    Thank you !

  5. #5
    Service Manager 1,000+ Posts
    aficio 2060 - Sc 122

    teebee1234's Avatar
    Join Date
    Jul 2008
    Location
    Atlanta, GA
    Posts
    1,671
    Rep Power
    58

    Re: aficio 2060 - Sc 122

    One thing to check is to make sure the set screw that locks the cable pulley to the scanner drive shaft didn't back out or shear off.

  6. #6
    Senior Tech 100+ Posts lupi's Avatar
    Join Date
    Aug 2011
    Location
    northville/ manila... :-)
    Posts
    102
    Rep Power
    27

    Re: aficio 2060 - Sc 122

    SC122
    [Cause]
    SDRB board is faulty.
    [Resolution]
    Replace the SCRB board and ground.

    AND
    SC122 occurs while scanning.
    Does not occur when scanning at the same magnification; occurs when copying and enlarging.
    Answer
    [Cause]
    Scanner motor is faulty.
    [Resolution]
    Replace scanner motor.

  7. #7
    Technician Zoran's Avatar
    Join Date
    May 2013
    Location
    Nis
    Posts
    44
    Rep Power
    0

    Re: aficio 2060 - Sc 122

    Replace or repair B247-5180
    Attached Images Attached Images

  8. #8
    Technician
    aficio 2060 - Sc 122

    The CopyDoc's Avatar
    Join Date
    Oct 2012
    Location
    Florence
    Posts
    19
    Rep Power
    24

    Re: aficio 2060 - Sc 122

    Scanner home position error 3
    The scanner home position sensor
    does not detect the on condition
    during original scanning.

    A unit that old, probably a dirty Home Position sensor

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here