Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    Apr 2011
    Location
    Way Out West
    Posts
    40
    Rep Power
    27

    SC672 hard failure on a Ricoh AFicio 2060

    Symptoms - After unplugging and turning on, says "Please wait". Then about 1/2 mt later goes into SC672.
    This is a hard failure, nothing i've done today has recovered the copier. So far i removed re-inserted the Main controller pcb, IPU and motherboard. Also cleaned swapped both main dimms, tried with only one main dimm, removed all options and SD cards on main pcb. Tried new NVram. Tried flashing firmware with SD card. Disconnected Hdd power and cable. Re-did control panel connectors.
    Copier has a Print/Scan sd card and PS card. No fax. Firmware quite old but couldnt upgrade due to 672.
    After 3 hours of this messing around the 672 still recurs.
    The only difference i noticed is when i install only one Main Dimm in either slot, the machine "sort of" boots up a little further and then goes into an SC990 code. Now i can enter service mode. Havent tried anything yet using service mode though.
    Have ordered the Main Contr pcb and both Dimms plus Motherboard and Dimm. May consider IPU pcb and Control panel.
    Any tips will be very much appreciated and thanks.
    Last edited by JDS; 08-17-2011 at 04:07 PM.

  2. #2
    How'd ya manage that? 1,000+ Posts
    Join Date
    Dec 2009
    Location
    NoneOfYoiurBusinessVille
    Posts
    1,026
    Rep Power
    60

    Re: SC672 hard failure on a Ricoh AFicio 2060

    Did you try without the HDD plugged in also?

  3. #3
    Technician
    Join Date
    Apr 2011
    Location
    Way Out West
    Posts
    40
    Rep Power
    27

    Re: SC672 hard failure on a Ricoh AFicio 2060

    Quote Originally Posted by zed255 View Post
    Did you try without the HDD plugged in also?
    Yes tried that so that eliminates the Hdd i hope. Thanks.

  4. #4
    Technician
    Join Date
    Apr 2011
    Location
    Way Out West
    Posts
    40
    Rep Power
    27

    Re: SC672 hard failure on a Ricoh AFicio 2060

    Update - the problem was fixed by replacing the Main Controller pcb and the Dimms (128mB and 256mB).

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here