Originally Posted by
Old Guard
Hi, we have had a number of machines which show this fault when the the printer cable in plugged in (usually from new) or when large files are sent to the machine. All the firmware is at the very latest version. There may also be other circumstances where this fault happens, for example when using DHCP but the same machine is OK on a fixed IP address. Any one had any knowledge of this fault or cures. SSPD is turned off in Config and the correct gateway and subnets are in use. The same fault can also occur on MPC 7501 machines. Incidently this SC code is not in the service manual but can be found in the MPC 7501 manual.
Bookmarks