MPC 2551 SC799

[Jeffjazzy]

Has anyone seen an SC799 problem on an MPC2551? We'd appreciate any help with this.

Thanks,
Jeffjazzy

[Eric1968]

SC799 = Output Tray Motor Error.

Can be a motor overload or a loose connection.

[lupi]

SC779	B	1st Stopper Motor Error
The 1st stopper HP sensor did not detect the 1st stopper in (or out of) its home position within the prescribed time. The 1st occurrence causes a jam, and the 2nd occurrence causes this SC code.
• 1st stopper HP sensor dirty • Sensor harness or connector loose, broken, defective • 1st stopper motor harness or connector loose, broken, defective • Sensor defective • Motor or motor drive board defective

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com