The machine only has copy with no harddrive and ricohsaid to replace the laser which I did and still have this code. Any suggestions would be great thank
Thanks: 0
Likes: 0
Dislikes: 0
The machine only has copy with no harddrive and ricohsaid to replace the laser which I did and still have this code. Any suggestions would be great thank
Check and re-seat all the wire harnesses on the SBCU PCB / if that does not work replace the SBCU PCB.
Originally Posted by yannii33
Print image data transfer error After a data transfer begins from the controller to the engine via the PCI bus, the transfer does not end within 15 s. · Controller board defective
· BICU defective
· BICU, controller disconnected
Print image data transfer error After a data transfer begins from the controller to the engine via the PCI bus, the transfer does not end within 15 s. · Controller (SIMAC) board defective
· BICU defective
· BICU ó controller disconnected
sir help
how to reset the counter of my ricoh 2015 or 2018...thanks
alot
PM CONTER RESET BA PRE?
PM Counter Rest Procedure Answer SP7804 PM Counter Clear - Do this SP to reset SP7803 (PM Counter).
Reply With Quote
Bookmarks