Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: MPC6001 TANDEM

  1. #1
    Technician
    Join Date
    Dec 2009
    Posts
    42
    Rep Power
    30

    MPC6001 TANDEM

    hi

    I have a probleme with detection paper on right tray in Tandem

    PCB Paper board was change


    (when a put the tandem in the machine i don't here the activation off pick up sol)

    need help

    thx

  2. #2
    Technician m3lvz28's Avatar
    Join Date
    Jan 2011
    Location
    Al khubar
    Posts
    16
    Rep Power
    27

    Re: MPC6001 TANDEM

    HI

    try to check the actuator of the sensor that attach to end fence on the right side tray clean or change the sensor.

  3. #3
    Technician
    Join Date
    Dec 2009
    Posts
    42
    Rep Power
    30

    Re: MPC6001 TANDEM

    Look for broken spring on paper feed assy
    or
    you can also adjust the position off right tray in the machine (look at the back of right tray for adjustement)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here