mpc 4500

[xordi69]

Banding in printed images. I mpc4500_2_0001.jpgmpc4500.pdfhad replaced transfer belt, drums,transfer belt motor, any adjustment?

[rthonpm]

Kind of unavoidable I'm afraid. You'll never really get a clean image with that high of a coverage rate. You can try the ACC settings, as well as good paper: colour machines love good paper. Here in the US, I recommend nothing below 24 pound laser paper, and for best results 28-32 pound.

[Max]

Is it a print or a copy? If print try the basic stuff 1 st clen the lazer glass x4, if copy then optics. Use proper glass cleaner non abrasive cloth that leaves no streakes.

[xordi69]

i know, but i answer for the vertical lines, like a transfer trouble.I know its a high coverage, but in a 3245c , same image, it's ok.

[xordi69]

in print, all optics are cleaned and calibration made

[xordi69]

perhaps developer?