Results 1 to 2 of 2

Thread: MP2000

  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Aug 2011
    Location
    North Lanarkshire
    Posts
    55
    Post Thanks / Like
    Rep Power
    7

    MP2000

    HI all.
    Anyone out there had a PCU fail on a new machine (1600 prints) leaves a grey band down one edge (short edge) in feed direction,
    i split the upper PCU and band was round charge roller also a line of coating worn off drum at edge of blade on opposite end.
    I cleaned the charge roller and blade reassembled the unit and it seemed fine but customer phoned next day to say fault is back.
    Any help appreciated.


  2. #2
    Service Manager 100+ Posts vargue's Avatar
    Join Date
    Oct 2011
    Location
    alxandria
    Posts
    233
    Post Thanks / Like
    Rep Power
    0

    Re: MP2000

    this thread happened when drum has bad connectivity change drum also if toner is moisturized and also developer accrues in this grey line in edge of paper ...


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here