Thanks:
0
Dislikes:
0
-
Re: MPC2050 jam in the paper tray 1
Went back today, it was showing a jam customer couldn't clear, all it was is a torn jam just under the reg roller. Phew! I didnt fancy replacing that clutch!!!
-
Technician
- Rep Power
- 30
Re: MPC2050 jam in the paper tray 1
did you change D0391166 2 pcs and D1051164 you have to replace them.
But could also be that cassett are worn put a schrewdriver in the gap between casett 1 & 2 and se if there are any change in function
Lars
-
Re: MPC2050 jam in the paper tray 1
No, after I removed the jam I ran 100 duplex prints without any issues, I was satisfied it doesn't need the clutches, also it does have a low total count, 90k
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks