MP C6000 ADF Jamming only in duplex and only on 11x17 leaning toward a sensor but not sure. Get Jam code J009. Then you get a Functional Error and have to reboot the machine. There is all so a chance that it is the wiring harness on the doc feeder.
MP C6000 ADF Jamming only in duplex and only on 11x17 leaning toward a sensor but not sure. Get Jam code J009. Then you get a Functional Error and have to reboot the machine. There is all so a chance that it is the wiring harness on the doc feeder.
Do you have any sc code in logs after reboots
What is the Functional Error. J009 is paper late getting to the lower inverter sensor. On the surface it would seem it is a o/w slipping, but may also be the ADF board.
Why is the harness in question?
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Hey Jo what are you refering to when you say "o/w"?
Many thanks....we have already replaced the Torque limiter.
I wasnt thinking of the torque limiter but there are oneway gears on the rear frame that control the paper thru the reversal and exit path. Paper is Late getting to the inverter sensor.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Bookmarks