Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Technician
    Join Date
    Aug 2011
    Posts
    34
    Rep Power
    0

    Fusing unit rebuilds

    Does everyone else out there rebuild AF 1022 to 3025 range fusing units and if so do your fusing roller bearings knock even after you apply Barrieta grease. Or are fusing units replaced as a complete assy.


  2. #2
    How'd ya manage that? 500+ Posts zed255's Avatar
    Join Date
    Dec 2009
    Posts
    818
    Rep Power
    34

    Re: Fusing unit rebuilds

    I rebuild 'em and don't have any issues with them knocking, just don't be frugal with the Barrierta grease.

    Zed
    One out of four people is mentally unbalanced.
    Think of your three closest friends...
    If they seem okay, then You're The One.

  3. #3
    Field Supervisor 1,000+ Posts Eric1968's Avatar
    Join Date
    Jan 2009
    Location
    Rotterdam, Netherlands
    Posts
    2,465
    Rep Power
    59

    Re: Fusing unit rebuilds

    I also rebuild them. You can also use the bearings of the AF2035. They run smoother.


  4. #4
    Service Manager 1,000+ Posts rthonpm's Avatar
    Join Date
    Aug 2007
    Location
    Pennsyltucky
    Posts
    1,709
    Rep Power
    50

    Re: Fusing unit rebuilds

    I agree with Eric. The added bonus of using the 2035 bearings is that the extra shoulder on the bearing will help to keep the heat tube in place in the event of the plastic frame breaking.


  5. #5
    Field Supervisor 500+ Posts
    Join Date
    Oct 2008
    Location
    manchester
    Posts
    506
    Rep Power
    24

    Re: Fusing unit rebuilds

    good idea with the 2035 bearings. iv had plenty where the fuser frame snaps. 2035 bearings will be perfect to stop this from happening. i will try this next time. thanks


  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Jun 2009
    Location
    Rayville La
    Posts
    64
    Rep Power
    18

    Re: Fusing unit rebuilds

    Also you can use rvt gasket silicon on the ends of the hot roller then put on the bearings, this stops the noise. Just put a small ammount all the way around the roller, then reassemble the unit, It's worked every time.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here