Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Mar 2011
    Location
    Leicester
    Posts
    5
    Post Thanks / Like
    Rep Power
    0

    MPC2051 Ghost Image

    Hi folks,

    I have an mpc2051 with intermitent ghost images, oil roller assy has been fitted lasted about 3 weeks bnow the faults has come back. any help much appreciated, genuine toner is being used, machine has done 14k on the black and 6k on colour all firmware is upto date. thanks.


  2. #2
    Trusted Tech 50+ Posts
    Join Date
    May 2011
    Posts
    87
    Post Thanks / Like
    Rep Power
    7

    Re: MPC2051 Ghost Image

    I had the same problem with this model.
    The way to overcome the situation was increasing the fusing temperature (in SP mode).
    Since that time it no longer exists a ghost image problems


  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Oct 2008
    Location
    Italy
    Posts
    79
    Post Thanks / Like
    Rep Power
    12

    Re: MPC2051 Ghost Image

    Hi, excuse me for may bad english.
    In italy there is this technical bulletin : ghost image at intervals of 95 mm.
    CAUSE
    The brush discharge has not been reinstalled after replacing the fuser unit of
    Optional cleaning roller. This causes the toner to the charging roller surface
    presser.
    ACTION
    Replace the cleaning roller optional (D0394380):
    - Be sure to remove the brush discharge from the fuser assembly, and
    reinstall it after installing the new optional cleaning roller.
    - Ensure that the brush discharge is fixed to the support.

    Ciao.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here