im getting a jam code 22 continiously on a mp9000.I know the problem is on the exit unit,but where?cleaned one way bearings,cleaned shafts where bearings runs on & also changed all sensors.looks like if something is slowing the exit section.
im getting a jam code 22 continiously on a mp9000.I know the problem is on the exit unit,but where?cleaned one way bearings,cleaned shafts where bearings runs on & also changed all sensors.looks like if something is slowing the exit section.
I guess youve checked the two little rollers above the fuser exit tyres are in position
i have the same problem to a katana mp1350,trying to solve it!!! (j 22)
DIO-masterprint
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
http://www.justmanuals.com
Paul@justmanuals.com
have you try to check this B234 4256 - Drive Shaft sometimes it worn out in the long run... good luck
fix the customer first then fix the machine... its simple and makes life more easy.
Bookmarks