Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 33
Ricoh spc411 need to know how to get into sp mode. Thanks in advance
Cant get into service spc 410 menu n forms no forms button on the 411
-
Re: Ricoh spc411 need to know how to get into sp mode. Thanks in advance
Press the “Up/Down arrow” keys together for about 5 seconds, and then press the “OK” key.
“SYSTEMver x.xx/ 1. Service” appears on the display.
(The machine automatically goes off line when you enter the service mode.
Accessing the Required Program
Use the “Up/Down arrow” keys to scroll through the menu listing.
1. Service: Controller service modes
2. Engine: Engine service modes
3. End: Exit service mode
- To select an item, press the “OK” key. Then the sub-menu shows.
- Scroll through the sub menu items using the “<>” keys.
- To go back to a higher level, press the “Escape” key.
Inputting a Value or Setting for a Service Program
- Enter the required program mode as explained above. The setting appearing on the display is the current setting.
- Select the required setting using the “<>” keys, then press the “OK” key. The previous value remains if the “OK” key is not pressed.
Exiting Service Mode
- Select “End” from the service mode main menu, then press the “OK” key.
- To make the settings effective, turn the main switch off and on after exiting service mode.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks