Thanks:
0
Likes:
0
Dislikes:
0
-
MPC 3000 with SC-195 after EEPROM replacement on Controller board
Hi Guys
I have been working on this box for over a week, My first issue was SC995 which after a long drawn out saga turned out to be the I/O board. I have since replaced the I/O board but also replaced the EEPROM on the controller board and now i am getting an SC195 error and when i go to Service mode everything is in Japenese and i cant put in the serial number.
Has anyone any solutions???
Thanks
-
Re: MPC 3000 with SC-195 after EEPROM replacement on Controller board
when you replace the I/O board check the dip switch on it. compare it to the old one. that's the reason why the language is japanese. sometimes the 1 and 6 is on. maybe also that's the reason why you are getting the sc-195.just an idea.
-
Senior Tech
100+ Posts
- Rep Power
- 31
Re: MPC 3000 with SC-195 after EEPROM replacement on Controller board
enter serial using this service mode
yellow-1-4-3-red-red(hold)
-
Senior Tech
250+ Posts
- Rep Power
- 33
Re: MPC 3000 with SC-195 after EEPROM replacement on Controller board
Hi buddy,
Was stuck in MP3352SP after replacing BICU and controller, the serial no. Found your post. I'm not a Ricoh tech but ur guidance help me out.
Great work buddy.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks