MPC 4500 Print out full colour toner not stick on the paper .
If just print out normal wording its fine .
i've change the fuser belt but still the same ..
MPC 4500 Print out full colour toner not stick on the paper .
If just print out normal wording its fine .
i've change the fuser belt but still the same ..
Please help .. dont know whether heather lamp not enough hot or other issues ?
use original toner?
Good question ..
Need to double confirm on that as we used two type of toner ori & not ori..
whith original toner no trouble. Put original toner, exhaust not original toner in dev unit(make single color copies), and fix ok. Ive had the same problem whith not original toner.
Are the fuser arms damaged? they put the pressure between the fuser rollers, is the paper type any different than normal? if so then the correct paper type will need to be set up. i.e. thick 1 etc.
Networking skills are advantageous but use of a 3m vacuum cleaner is essential
will try setting the paper thickness next week..
Will be heat roller spongie orange one. Set the trays to thick 1 2 or 3 if using 80 gsm or heavier.
Bookmarks