the machine just will not regerster I have cleaned the sensors above the transfer belt. I even tried a new belt
is there a trick to get these machine to regester ?
any suggestions would be thankful
the machine just will not regerster I have cleaned the sensors above the transfer belt. I even tried a new belt
is there a trick to get these machine to regester ?
any suggestions would be thankful
Clean the silver roller at the top of the xfer unit. The id sensors bounce light off of them to perform the registration. There is a rotaion sensor on that unit also which may be dirty/defective.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Good. Those are the ID sensors and one of their uses is to adjust the registration.
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
Bookmarks