Thanks:
0
Likes:
0
Dislikes:
0
-
Ricoh 3245c
Hi I wonder if anyone can help me.
If printing multiple copy's thye first to are ok then they start to get ghoasting of another part of the print on them and then they have a missed bit of print and a rough texture on that part
thank you
-
Technician
- Rep Power
- 29
Re: Ricoh 3245c
Hi
I am assuming that you are not printing on thick paper with normal setting. normally ghosting is caused by fuser not fusing properly but in your case it cutting the prints also so i will say it's transfer unit. if it has done lot then whole unit needs replacement. I had same problem. I serviced the tx unit and replaced belt and blade but didn't help. finally replaced the whole tx unit and that fixed it. I had tried fuser before touching tx unit.
-
Re: Ricoh 3245c
Could be the Transfer Belt Cleaning Unit or the Fusing Unit. Could also be a bad PCU-Unit. PCU's and DV-Units last for 60k, might be worth checking.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks