MPW2401 Autocad prints border not printed

[Voltage]

Hi Guys.

I recently installed a MPW2401 at a architect. All the building plans have a border around almost 10mm from the edge. When a A0 plan is printed on A0, it prints perfectly. When the client wants to print a A0 on a A1, the leading and the trailing edges of the drawing is erased. When i print a pdf plan it works fine. Its only out of Autocad where it cuts of. it is as if the plan is still to big to fit on the page, even when fit-to-page has been selected

Any Ideas?

[TonerMunkeh]

I think it's to do with the way Autocad sets up the .plot file to print the job. It's been a long time since I've messed with Autocad so the details are sketchy, but if memory serves you have to change something in the plot file (possibly create a custom one) to make Autocad resize and construct the image correctly.

Then again, I may be talking shit! Worth a look tho.

[zhong]

Use 2400RPCS drivers can solve this problem