Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Ricoh MP2500

  1. #1
    Junior Member
    Join Date
    Nov 2011
    Location
    Cannock
    Posts
    3
    Post Thanks / Like
    Rep Power
    0

    Ricoh MP2500

    We have a MPC 2500 which has gone into error mode, and has a blank screen. It starts to warm up then signals that it has gone into a service call condition, but because it has also got a blank screen we do not know what is up with it. Anyone have any ideas? Many thanks.


  2. #2
    Service Manager 250+ Posts



    Join Date
    Oct 2007
    Posts
    310
    Post Thanks / Like
    Rep Power
    17

    Re: Ricoh MP2500

    HDD


  3. #3
    Service Manager 250+ Posts
    Join Date
    Jun 2009
    Location
    Fairfield, Ohio
    Posts
    379
    Post Thanks / Like
    Rep Power
    14

    Re: Ricoh MP2500

    Quote Originally Posted by copyaction View Post
    HDD
    If you know the IP address, try connecting to it through the web service. Then you might be able to see what code it is throwing at you.


  4. #4
    Field Supervisor 5,000+ Posts


    JustManuals.com's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,478
    Post Thanks / Like
    Rep Power
    133

    Lightbulb Re: Ricoh MP2500

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com


    When you need a manual and you need it NOW !

    http://www.justmanuals.com
    Instant downloads

  5. #5
    Service Manager 250+ Posts sharpmind's Avatar
    Join Date
    Sep 2009
    Posts
    282
    Post Thanks / Like
    Rep Power
    13

    Re: Ricoh MP2500

    Quote Originally Posted by copiermen View Post
    We have a MPC 2500 which has gone into error mode, and has a blank screen. It starts to warm up then signals that it has gone into a service call condition, but because it has also got a blank screen we do not know what is up with it. Anyone have any ideas? Many thanks.
    I have encountered the same problem. What I did first was I swapped the whole operation panel to check if it is good or not.I found out that there was nothing wrong in the operation panel.

    I have rectified the problem by replacing the BICU board and the polygon motor at the same time.Proven and tested!

    Last edited by sharpmind; 12-13-2011 at 07:41 PM.

  6. #6
    Senior Tech 1,000+ Posts


    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    1,442
    Post Thanks / Like
    Rep Power
    29

    Re: Ricoh MP2500

    Quote Originally Posted by copiermen View Post
    We have a MPC 2500 which has gone into error mode, and has a blank screen. It starts to warm up then signals that it has gone into a service call condition, but because it has also got a blank screen we do not know what is up with it. Anyone have any ideas? Many thanks.
    These models had a problem with the LCDC going non responsive, but I've not seen a blank one yet. Have you tried another op panel?

    NEVER ASSUME ANYTHING

  7. #7
    Junior Member
    Join Date
    Nov 2011
    Location
    Cannock
    Posts
    3
    Post Thanks / Like
    Rep Power
    0

    Re: Ricoh MP2500

    We have tried new control panel, no joy, unfortunately have no idea what the IP address is. So looks like polygon motor and BICU board next. Thanks for all your help. Will let you know how we get on.


  8. #8
    Junior Member
    Join Date
    May 2011
    Location
    Kuala Lumpur
    Posts
    7
    Post Thanks / Like
    Rep Power
    0
    get the IP address from your printer driver


  9. #9
    Tech 100+ Posts mabawser's Avatar
    Join Date
    Sep 2009
    Location
    Glasgow
    Posts
    119
    Post Thanks / Like
    Rep Power
    12

    Re: Ricoh MP2500

    had this and when looked it has a sc204 code if i remember right and the poloygon mirror motor was causing this!!


  10. #10
    Junior Member
    Join Date
    Nov 2011
    Location
    Cannock
    Posts
    3
    Post Thanks / Like
    Rep Power
    0

    Re: Ricoh MP2500

    Quote Originally Posted by mabawser View Post
    had this and when looked it has a sc204 code if i remember right and the poloygon mirror motor was causing this!!
    Thanks for that, have ordered polygon and BCIU, will hopefully sort problem.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here