Hi All.. I have an AF1035 that is reproducing thin black lines on the printed surface, opposite to the direction of feed , only in copy mode. So I get a copy image on the paper and in addition to this, thin black lines appearing along the entire paper (opposite to the direction of feed), maybe about 20-25 or so of these lines per A4R(portrait) feed, also no particular pattern just spread out at different intervals. Like i mentioned earlier when I generate a copy from memory like a counter reading ect this does not occur. Only in copy mode. Pls let me know what I shud be doing to rectify this. Thanks in advance for your responses
Bookmarks