Results 1 to 5 of 5
  1. #1
    Technician
    Join Date
    Oct 2007
    Location
    Seattle, WA, USA
    Posts
    24
    Post Thanks / Like
    Rep Power
    15

    Ricoh CL7200 + IS300e has Error SC541, but I can't clear the error

    Hi there, this is my first post.
    My Ricoh Aficio CL7200 has error code SC541. Some how paper got jammed in the fuser's connection. After clearing the paper, and rebooting it still comes up with this error.
    I did a search and found LaserSharp had this problem last month on his 7200.

    The problem is the scanner on my 7200 doesn't seem to communicate with the printer. When doing "Clear, 1,0,7, hold stop for 5 seconds" it gives Scanner related options.

    Is there a way to clear the code without the scanner? Or do I need to do something special to make the scanner talk to the printer?

    Thanks.


  2. #2
    Technician
    Join Date
    Nov 2007
    Posts
    22
    Post Thanks / Like
    Rep Power
    14
    Quote Originally Posted by Jeremy-Ricoh View Post
    Hi there, this is my first post.
    My Ricoh Aficio CL7200 has error code SC541. Some how paper got jammed in the fuser's connection. After clearing the paper, and rebooting it still comes up with this error.
    I did a search and found LaserSharp had this problem last month on his 7200.

    The problem is the scanner on my 7200 doesn't seem to communicate with the printer. When doing "Clear, 1,0,7, hold stop for 5 seconds" it gives Scanner related options.

    Is there a way to clear the code without the scanner? Or do I need to do something special to make the scanner talk to the printer?

    Thanks.
    Hi - Ricoh had a LOT of trouble with their El-Cheapo scanners. They are so fragile that sometimes just shipping them, or even relocating them with slight bumps, prevented them from working. Ricoh would never tell you this, but then again the truth escapes Ricoh quite often. I, on the other hand, have no trouble with the truth.


  3. #3
    Technician
    Join Date
    Nov 2007
    Posts
    33
    Post Thanks / Like
    Rep Power
    14

    Reset SC 541



    Here is some info from servicemanual you enter SP Mode by holding down "up" and "down" arrow for 10 s then you press "enter"
    Good luck

    SC 541 Heating roller
    thermistor error
    The temperature measured by
    the heating roller thermistor
    does not reach 7 C for ten
    seconds.
    Loose connection of
    the heating roller
    thermistor

    Defective heating roller
    thermistor

    Defective BCU
    1. Check if the heating roller thermistor
    is firmly connected.
    2. Replace the fusing unit.

    3. Replace the BCU.
    Controller
    errors CTL The error has occurred in the
    controller.
    See .Troubleshooting Procedure. in
    the table.
    A
    The error involves the fusing unit.
    The machine operation is disabled.
    The user cannot reset the error.
    Turn the main switch off and on.
    Reset the SC (set SP5-810-1). Turn
    the main switch off and on.
    B
    The error involves one or some
    specific units. The machine
    operates as usual, excluding the
    related units.
    Turn the operation switch off and
    on.
    C
    The error is logged. The SC-code
    history is updated. The machine
    operates as usual.
    The SC will not show. Only the SC
    history is updated.
    Other
    errors
    D
    The machine operation is disabled.
    You can reset the machine by
    turning the operation switch or main
    switch off and on. If the error occurs
    again, the same SC code is
    displayed.
    Turn the operation switch or main
    power switch off and on.



  4. #4
    Technician
    Join Date
    Oct 2007
    Location
    Seattle, WA, USA
    Posts
    24
    Post Thanks / Like
    Rep Power
    15
    Thank you for the information!

    As it turns out I was able to clear the code (It might have been SP5-810-1), and all is fine now.


  5. #5
    Technician
    Join Date
    Nov 2007
    Posts
    10
    Post Thanks / Like
    Rep Power
    14

    SC541

    Thermistor Of Fusion Opened


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here