duplex problem~please help~

**stupidkiller** · 01-09-2012

can i install ricoh 270 duplex on ricoh 1027 ? any modify needed ? help please thanks~~

**sandmanmac** · 01-10-2012

I`ve swapped the duplex interchange unit, bypass tray, lower paper trays, shift sort tray, but never the entire duplex unit. I imagine it would be fine. Only one way to find out -try it

**stupidkiller** · 01-10-2012

i've tried it,but the paper keep stuck.i just want to comfirm here if it is possible or who ever did this.
anyway thanks for ur reply,appreciate =)

**sandmanmac** · 01-10-2012

Originally Posted by stupidkiller

i've tried it,but the paper keep stuck.i just want to comfirm here if it is possible or who ever did this.
anyway thanks for ur reply,appreciate =)

Why not include that information in the original question? That now opens the door for all sorts of questions: why are you replacing it? Did the same problem exist? Are you sure it's actually the duplexer jamming and not the interchange unit? Where does the jam occur. Much More information is required to give you advice.

**stupidkiller** · 01-13-2012

thanks for the reply!
i will have a new try again but next week,i will write up the exact and clear message here and i hope to get ur help and reply.
thanks alot =)