Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Nov 2007
    Howes Cave, NY
    Rep Power

    SC 573/ False J111 Jams - Staple Error

    Currently working with a MP6500 - ongoing SC 573 problem and false J111 jam codes - narrowed problem down to a possible faulty positioning motor for the exit sponge roller assembly. Under 15K copies on unit - using the finisher output check function I'm finding that the motor will very often fail to energize. Has anyone run into this problem in the field - the finisher is a B071.

    Any suggestions are appreciated.

  2. #2
    It's not easy being green 1,000+ Posts Cipher's Avatar
    Join Date
    May 2006
    Rep Power
    I've had problems with the cheap and nasty plastic bearings they use on these finishers a few times.
    If it jams often on exit or makes a unusual noise just as it exits then jams check them out.
    They are small and made of a white plastic casing with metal bearing inside, normally when turned they are lumpy as hell.
    Greasing them up normally does the trick and makes them work smoother with less friction.

    There is also a RTB about jamming (RB700001) which may be the problem.

    Last edited by Cipher; 11-14-2007 at 01:00 PM.
    • Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.

    On request I can offer copytechnet members free support via Teamviewer.

  3. #3
    Senior Tech 100+ Posts
    SC 573/ False J111 Jams - Staple Error

    nobody-here's Avatar
    Join Date
    Mar 2008
    Rep Power

    Re: SC 573/ False J111 Jams - Staple Error

    Quote Originally Posted by Cipher View Post

    There is also a RTB about jamming (RB700001) which may be the problem.
    I guys,

    we're having a J111 False jam. (and SC725 Error) on a MP8000
    We would like to have a look to RB700001 but we don't have tessa access (Italian Ricoh Portal don't have such bulletin).
    Can you provide me this bulletin.


    29 rouge unpair manque.... cous cous....

  4. #4
    The New Guy 1,000+ Posts ruben's Avatar
    Join Date
    Oct 2012
    Bristol, UK
    Rep Power

    Re: SC 573/ False J111 Jams - Staple Error


    Could be this one.

  5. #5
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Bakersfield, CA
    Rep Power

    Re: SC 573/ False J111 Jams - Staple Error

    I cannot find SC573 in either the SM or Goose's Guide. Could that be a typo and the SC is actually 753 or 735? Those are both finisher errors. Most of Ricoh's finishers will give a jam indication in the finisher the first time an error is detected. You check for the jam and close the finisher door. The error is detected a second time and now the SC for the actual error is displayed.

    Eric, thanks for the link.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here