Originally Posted by
Polarbear
Slybot
Check if the df is sitting square in the scanner frame. You can check this by looking down the right side frame of the scanner. These df hinges are soft and we have had them bend because people move the machine by pushing against the df, and this bends it, which causes the white metal guide (that normally rests in the slit glass cavity, to be out of alignment, and this could be why your page is hitting the slit glass and/or cover, which causes the buckle in the original and produces the visible distortion on the copy.
You can also double-check by lifting the df slightly, while looking at the slit glass area. The white metal guide should easily fit into the area above the slit glass. If it compresses prematurely, then the df is out of alignment and you need to check the hinges.
Bookmarks