ricoh aficio spc411dn

[Walter]

Can anybody tell me how to remove the power supply on a ricoh spc411dn printer?

[mikadonovan]

Can anybody tell me how to remove the power supply on a ricoh spc411dn printer?

You need to get yourself a service manual for the step by step procedure. It is too involved on this model to even try to explain it. (Not an easy job, either)

[JustManuals]

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

Paul@justmanuals.com

[mikadonovan]

You need to get yourself a service manual for the step by step procedure. It is too involved on this model to even try to explain it. (Not an easy job, either)

Actually, on second thought, it's the LD unit that sucks to remove. As far as the power supply board, pull out the controller, remove the 4 screws holding the rear panel on, pull out on the PS a little and remove the 2 short connectors. You now can pull the PS out the rest of the way.

[Jomama46]

Man oh man, Mika, Paul had that money spent already.

[Llama God]

Man oh man, Mika, Paul had that money spent already.

Spent it on his new avatar thingy.

[Walter]

i replaced the power supply and now i have an sc547 error any ideas?

[Walter]

i replaced the power supply and now i have an sc547 error any ideas?

thanks to all i got it done!!!