Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    rma
    Guest

    Lanier 6745 no image after dev in

    this is a old Lanier model 6745, no image shows when you make copies. I open the dev unit, see no developer in the chamber, I order the powder= OEM D4550/Toshiba 2550/4550??

    After repl. the dev still no image, is there any control panel ajd have to do or have to repl drum at same time.

    is it some trick on this old anatolge machine??


    thank for you time to help


  2. #2
    JAKDANLS23
    Guest

    Re:Lanier 6745 no image after dev in

    CHECK YOUR BIAS CONNECTOR(RED WIRE I THINK) AND ALSO CHECK THE DRUM GROUND......
    HOPE THIS HELPS


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here