printer configuration (MP 2000LN2)

[fritzyas]

Downloaded the DDST printer driver from Ricoh website and installed it in the computer. Set A4 portrait in the paper tray and the paper size orientation in the printer driver is also the same. Printed the test page but the machine showed"PAPER MISMATCHED, SET A4 landscape." Then I tried printing MS Word document, same thing happen. When the paper is set to A4 landscape, the printer prints automatically.But I want the printer to print in A4 portrait automatically because it reduces the time of printing and drum rotation.Any ideas?

hello not sharpmind read the printing reference and general settings.

[sharpmind]

hello not sharpmind read the printing reference and general settings.

hmm..ok..i know what you want to say..but I already did that.I have sample of the screenshot of the driver window pane.
mp 2000L2.jpg
I already changed that setting, but no luck..I have installed several Ricoh machines over the network and this is my first time to encounter that kind of problem in that model only.

[certifiedxeroxtech]

There is no option in the driver configuration where we can change the paper size in each tray.

hah! maybe if you install the optional trays you'll get the proper configurations. And or check the destination settings go to 5807-01 check the values.

[worksmart]

Guys, do you know how to configure MP 2000LN2 over the network? I have no idea about the printer configuration of this machine. I've done the basic driver installation but the machine does not print.Network is ok coz' i can access the web monitor of the machine.

Try this steps.
1. Right click on the Printer Driver
2. Select Properties.
3. If you have already assigned the IP then click "Configure Port"
4. Check the Port settings to "RAW'
5. Change Raw Settings from 9100, to 10001.
6. OK.

I hope this resolves the problem.


REGARDS.

[worksmart]

hello not sharpmind read the printing reference and general settings.

Try this step.
In the printing preferences
Go to PAPER,
Do not forget to chk the box (Long Edge is Vertical). (If you are using in the machine's tray paper size is A4 and not A4R).
I hope this resolves the problem.

REGARDS

[sharpmind]

Try this step.
In the printing preferences
Go to PAPER,
Do not forget to chk the box (Long Edge is Vertical). (If you are using in the machine's tray paper size is A4 and not A4R).
I hope this resolves the problem.

REGARDS

Thank you for your reply. I do appreciate it.Anyway, i forget to update you guys regarding the solution of this problem. Day after I posted this thread, I went back to client to solve the problem.Luckily I found that checkbox (Long Edge is Vertical).