Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Technician
    Aficio 2232c...ID sensor VSG adjust came up SC385.

    zflash7's Avatar
    Join Date
    Jun 2012
    Location
    Brisbane
    Posts
    39
    Rep Power
    0

    Aficio 2232c...ID sensor VSG adjust came up SC385.

    I cleaned it went through the process. Then replaced the drums and transfer belt with refurbished good stuff, gave it a clean n greases.
    Then tried to set the maintained coluor. (Failed). then went to the SP 5-993-002 to force the adjustment. (failed)
    It prints terrible. and the SC385 still comes up every now and then.
    Is there a way to get it to calibrate?
    RE:
    Paul

  2. #2
    FORMER Techie 1,000+ Posts tcs04's Avatar
    Join Date
    Apr 2009
    Posts
    1,184
    Rep Power
    43

    Re: Aficio 2232c...ID sensor VSG adjust came up SC385.

    Quote Originally Posted by zflash7 View Post
    I cleaned it went through the process. Then replaced the drums and transfer belt with refurbished good stuff, gave it a clean n greases.
    Then tried to set the maintained coluor. (Failed). then went to the SP 5-993-002 to force the adjustment. (failed)
    It prints terrible. and the SC385 still comes up every now and then.
    Is there a way to get it to calibrate?
    RE:
    Paul

    1) re clean the ID Sensors

    2) MUSIC coarse adjustment (Code anyone... no time to look up)

  3. #3
    Field Supervisor 1,000+ Posts Eric1968's Avatar
    Join Date
    Jan 2009
    Location
    Rotterdam, Netherlands
    Posts
    2,460
    Rep Power
    72

    Re: Aficio 2232c...ID sensor VSG adjust came up SC385.

    SP5-993-039. This is a rough line positioning adjustment. If that one completes, then use SP5-993-001. Did you also reaplce the ITB Cleaning Unit?

  4. #4
    grumpy old git 500+ Posts banginbishop's Avatar
    Join Date
    Oct 2007
    Posts
    894
    Rep Power
    46

    Re: Aficio 2232c...ID sensor VSG adjust came up SC385.

    have you cleaned the silver roller on the transfere belt - the id sensors (middle sensor checks id, front and rear check line position) look directly at this roller when doing registration and image density. It has to be spotless. also you say refurbished parts? ive never put anything except genuine parts in these as they were unavailable as single items ie. drum charge blade etc may have changed but have you also reset the pm count sp 5-999?

  5. #5
    Technician
    Aficio 2232c...ID sensor VSG adjust came up SC385.

    zflash7's Avatar
    Join Date
    Jun 2012
    Location
    Brisbane
    Posts
    39
    Rep Power
    0

    Re: Aficio 2232c...ID sensor VSG adjust came up SC385.

    OK, I have allot to chew on I'll get back to you-all next week.
    Thanks.
    let you know how it fares..

  6. #6
    Technician
    Aficio 2232c...ID sensor VSG adjust came up SC385.

    zflash7's Avatar
    Join Date
    Jun 2012
    Location
    Brisbane
    Posts
    39
    Rep Power
    0

    Re: Aficio 2232c...ID sensor VSG adjust came up SC385.

    Quote Originally Posted by Eric1968 View Post
    SP5-993-039. This is a rough line positioning adjustment. If that one completes, then use SP5-993-001. Did you also reaplce the ITB Cleaning Unit?
    also I re-cleaned the ID sensor. one was too dirty.
    Thanks this did the trick.
    It calibrates well now.
    BUT.. I still have the original problem with the pick up rollers. The sensors wont even let them pick up on any trays. Miss feed occurs.. I'd do a post..

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here