Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Senior Tech 100+ Posts Solotime's Avatar
    Join Date
    Feb 2009
    Posts
    223
    Rep Power
    33

    MP2550 with SR790 Finishers

    We just received in 2 of these units and both are throwing SC792 codes. The finishers are hooked up and installed properly. Strange that both are doing this. Is there something on the setup that I am missing. Both are very good condition used machines with around 40K on them.
    Thanks

  2. #2
    Service Manager 2,500+ Posts rthonpm's Avatar
    Join Date
    Aug 2007
    Location
    Pennsyltucky
    Posts
    2,784
    Rep Power
    108

    Re: MP2550 with SR790 Finishers

    I may be misremembering, but I think that the firmware for the finisher ROM had to be at a certain level for it to work with the newer generation machines.

  3. #3
    Field Supervisor 2,500+ Posts
    MP2550 with SR790 Finishers

    Jomama46's Avatar
    Join Date
    Apr 2008
    Location
    Fairfax, VA
    Posts
    2,900
    Rep Power
    66

    Re: MP2550 with SR790 Finishers

    SC 792 Check accessory harness for possible short
    SC 792 Finisher Unit Error - Defective finisher harness
    SC 792 Finisher Unit Error - Defective finisher unit
    SC 792 Finisher unit error - Check/Replace Fuse 4 on PSU
    SC 792 Finisher Unit Error - Poor connection of finisher
    SC 792 Finisher Unit Error - remove bridge unit if no finisher installed
    SC 792 Finisher unit error: Check/Replace Fuse 4 on PSU
    SC 792 Finisher Unit Error: Defective finisher harness
    SC 792 Finisher Unit Error: Defective finisher unit
    SC 792 Finisher Unit Error: Poor connection of finisher

    You never realize how cheap a professional is until after you let an amateur do it.
    A+; Network +; PDI+

  4. #4
    Service Manager 1,000+ Posts Llama God's Avatar
    Join Date
    Mar 2009
    Location
    Newcastle upon Tyne
    Posts
    1,355
    Rep Power
    47

    Re: MP2550 with SR790 Finishers

    Quote Originally Posted by rthonpm View Post
    I may be misremembering, but I think that the firmware for the finisher ROM had to be at a certain level for it to work with the newer generation machines.
    I think that I read this too, probably in a firmware download recently.

  5. #5
    Field Supervisor 500+ Posts Bantams's Avatar
    Join Date
    Jun 2012
    Location
    Bradford, West Yorkshire
    Posts
    603
    Rep Power
    36

    Re: MP2550 with SR790 Finishers

    Quote Originally Posted by Llama God View Post
    I think that I read this too, probably in a firmware download recently.

    +1 Firmware needs updating

  6. #6
    Bowdog 250+ Posts Gary Bowen's Avatar
    Join Date
    Mar 2008
    Location
    Victoria BC
    Posts
    250
    Rep Power
    37

    Re: MP2550 with SR790 Finishers

    Current version of firmware for the SR790 Finisher is v5.11. It is an EPROM so must be replaced on the Finisher Control PCB. The part number for the EPROM is B4085164.

  7. #7
    Senior Tech 100+ Posts Solotime's Avatar
    Join Date
    Feb 2009
    Posts
    223
    Rep Power
    33

    Re: MP2550 with SR790 Finishers

    I will check to see if I can order this chip...not being a Ricoh dealer and all. So if this new firmware Eeprom is replaced that will resolve the error without having to apply any updates to the copier?

    Thanks again

  8. #8
    Field Service Manager SteveF's Avatar
    Join Date
    Jul 2012
    Location
    Birmingham
    Posts
    49
    Rep Power
    24
    I seem to remember you need to check if it is a 790 a or b series...the a version wont work on the newer models

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here