Ricoh MPC3500

[GeorgeBest]

customer complains that when various commands are sent to the printer the outputof jobs is "mixed". For example, a large job is being sent and start printing, than another smalljob sent by another person is immediately printed and the output lies between the output of the large job. . Is there an adjustment to prevent this ?Machine has only one output tray.Thanks in advance

[ss12]

customer complains that when various commands are sent to the printer the outputof jobs is "mixed". For example, a large job is being sent and start printing, than another smalljob sent by another person is immediately printed and the output lies between the output of the large job. . Is there an adjustment to prevent this ?Machine has only one output tray.Thanks in advance

for a start i would check print driver settings,whether or not drivers are installed locally or via a server if so delete and reinstall drivers.This is relatively simple to do before you start digging into the machine

[GeorgeBest]

All drivers are installed locally, not on a server.

[sandmanmac]

sounds like a firmware issue to me. That's where I'd start

[nmfaxman]

Is the port for drivers set to LPR?
Raw goes to the memory, LPR goes to the HDD and acts as a spooler preventing multiple jobs from getting mixed up.

[GeorgeBest]

It is default and probably RAW . . .You're sure that LPR prevents "mixing" the jobs ?