hi guys
i have an mp 2000 that jams in the fusing unit when i copy anything with colour content and the copy gets wrapped around the hot roller what could be the problem.
your assistance will be highly appreciated.
thanks,
margic brian.
hi guys
i have an mp 2000 that jams in the fusing unit when i copy anything with colour content and the copy gets wrapped around the hot roller what could be the problem.
your assistance will be highly appreciated.
thanks,
margic brian.
confused is it an mpc or mp. second whats the service life of the fuser you have in it and also is it oem toner?
[QUOTE=margic brian;312729]its actually an mp2000 and the fusing unit was just fixed last week no its not original toner
[QUOTE=margic brian;312730]so whats with the colour content bit? trying to understand as an mp2000 is b/w. what percentage is the copy i.e. 10% 80% coverage? you can adjust the lead edge to compensate for heavy coverage and non genuine toner is rubbish for these machines as well. destroys dev box unit, fuser jams and pcq. you can also adjust the picker finger metal plates but these cause premature wear ont the fuser roller
Are you using Glossy INKJET photo paper?
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
increase the lead edge erase margin.
replace the hot roller if contaminated by toner,
use oem toner!
Bookmarks