Ricoh MPc4502 PCU

[Llama God]

I tried the B2242042 PCU in an MPc5000 today. The black one needs the 2 end wires reversing as per using the D0292256 black units in the colours, but other than that it works fine. The colours are even easier - shave the connector down on the back and you're good to go!

This works out at a saving of roughly £30.00 per PCU for us. It also means that we only need to stock B2242042 PCUs and the black one for the new MPC5502!

The only word of warning that I would offer is that this has had fairly limited testing thus far.

[Llama God]

I tried the B2242042 PCU in an MPc5000 today. The black one needs the 2 end wires reversing as per using the D0292256 black units in the colours, but other than that it works fine. The colours are even easier - shave the connector down on the back and you're good to go!

This works out at a saving of roughly £30.00 per PCU for us. It also means that we only need to stock B2242042 PCUs and the black one for the new MPC5502!

The only word of warnign that I would offer is that this has had fairly limited testing thus far.

Or what Bantams already said! I should pay more attention in class.

[sandmanmac]

*FYI, I edited it online with "PDFescape".

Nice edit, and very cool site! Thanks for that. It'll come in very handy.
Now THIS is one of those threads that just keeps getting better!

Thanks everyone​ for the very helpful info!

[Lagonda]

My lug removing jig suddenly re-appeared.

20121109_085936_3264x2448.jpg20121109_090019_3264x2448.jpg


There is a slot on the end of the rod that the metal bracket that holds the lug slips into. Swing the handle from side to side several times and the lug snaps neatly off. All over and done with in seconds.

This tool is copywrited and patents pending. Manufacturing rights can be purchased with the appropriate amount of single malt scotch.

[Llama God]

I use very strong snips. You are not getting my whisky, it's mine and I need it.

And I do mean need.

[Lagonda]

I use very strong snips. You are not getting my whisky, it's mine and I need it.

And I do mean need.

Its almost midnight in the UK Llama, now finish your bottle of whisky and go to bed, if you can still find your bedroom

[Llama God]

I've just finished watching the latest episode of South Park, "Obama Wins." It's most excellent.

[Bantams]

Or what Bantams already said! I should pay more attention in class.

Been using these for 4 months in over 20 machines now with no problems so far.

[teebee1234]

Ok, I added Lagonda's picture of the base plate for clarification. We have over 60 techs in our area, so this will be a great benefit. Currently quite a few don't want to be bothered with modifying, thinking it's too much work and/or not knowing what goes with what. With the chart and pictures along with the proven immediate cost savings, there should be no excuse. Our six service managers are on board and have sent it out to the field to be implemented.
Thanks again to all involved for sharing your skills and knowledge, this could never be accomplished in-house and would be shot down by the non techs in control. It feels good to beat the system whenever possible.

[Lagonda]

You made a nice job of that list TeeBee.
I wonder what Ricoh will do next? will they give in gracefully or go out of their way to make the next generation of copier even harder to swap PCUs over.