Page 6 of 6 FirstFirst 123456
Results 51 to 56 of 56
  1. #51
    Service Manager 2,500+ Posts
    Ricoh MPc4502 PCU

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,885
    Rep Power
    159

    Re: Ricoh MPc4502 PCU

    Quote Originally Posted by redneckstylin View Post
    Here is NEW DRUM SHEET MOD !!!!!!!! this is how we do it here
    Your version number is probably pretty accurate considering how many times its been updated and improved.

    Thanks for the info!

  2. #52
    Field Supervisor 500+ Posts Zaxxon's Avatar
    Join Date
    Jan 2014
    Posts
    607
    Rep Power
    36

    Re: Ricoh MPc4502 PCU

    Quote Originally Posted by Imprestik View Post
    Why the hell is everyone mucking around with modifying wiring harnesses and the like....

    You do realize the SPC830 color kit is a straight fit into both the 01 and 02 series of device...

    No modifying TD sensors, wiring harnesses, filing plastic, they are direct fit with NO modification required

    For the 01 you cut the clip off the back, for the 02 you either break the clip off the front or just swap the original cover over

    Done and dusted all 3 colors in 1 shot

    Use the original K PCU and your good to go
    Just done this nifty trick on a MPC 5502 - with no luck - Get the message to insert the pcu correctly - (and the toners too)?

    Any clue?
    Last edited by Zaxxon; 11-07-2014 at 11:30 AM.

  3. #53
    Field Supervisor 500+ Posts Zaxxon's Avatar
    Join Date
    Jan 2014
    Posts
    607
    Rep Power
    36

    Re: Ricoh MPc4502 PCU

    Quote Originally Posted by Zaxxon View Post
    Just done this nifty trick on a MPC 5502 - with no luck - Get the message to insert the pcu correctly - (and the toners too)?

    Any clue?
    Tried swapping wire 1 and 2 no luck...

    Perhaps my misunderstanding using the entire unit (not only the PCU)

    Ending up installing (only) the 3 CMY PCU with great success. Thrashing the 3 dev. units.
    Last edited by Zaxxon; 11-07-2014 at 11:56 AM.

  4. #54
    Senior Tech 250+ Posts
    Join Date
    Aug 2012
    Posts
    276
    Rep Power
    28

    Re: Ricoh MPc4502 PCU

    Quote Originally Posted by redneckstylin View Post
    Here is NEW DRUM SHEET MOD !!!!!!!! this is how we do it here
    Just be careful with the Mod Sheet in regards to the SPC830 fuser being used in the MPC3002/3502

    It is highly not recommended to do this as the lamps in the belt assembly are different as well as the base plate.

    I have seen these fusers kill a MPC3502/3002 completely due to this

  5. #55
    Senior Tech 250+ Posts kannuki2's Avatar
    Join Date
    Feb 2012
    Posts
    398
    Rep Power
    0

    Re: Ricoh MPc4502 PCU

    Thanks for the warning, so the SPC830 fuser kit will only work on the MPC4502 and MPC5502, do not attempt to use it on the MPC3002/C3502?

  6. #56
    Senior Tech 250+ Posts
    Join Date
    Aug 2012
    Posts
    276
    Rep Power
    28

    Re: Ricoh MPc4502 PCU

    Quote Originally Posted by kannuki2 View Post
    Thanks for the warning, so the SPC830 fuser kit will only work on the MPC4502 and MPC5502, do not attempt to use it on the MPC3002/C3502?
    Oh don't get me wrong, it will work but if you keep blowing up power supply's don't whinge on the forums asking for help

    I got caught out big time once with a number of techs replacing power supplies as the device kept on popping them. Only realised what happened due to the different coloured tabs on the fuser, put the correct fuser in and it works like a charm

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here