Where is this option on MPC2800, MPC4500 and others?
(Picture taken on a MP6500)
Where is this option on MPC2800, MPC4500 and others?
(Picture taken on a MP6500)
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
On the MPC range on normally gets to chose (once!) between developments (counts 4 for every print) and prints, depending on how the machine was sold - on what copy cost contract.
One can also (in service mode) switch on a mode, which will show copies and prints seperate on the counter page - I believe it is called accounting counter, if memory serves.
What do you need to change as far as copy count goes?
This has nothing to do with the machine's total counter.
I need the original counter of the copy screen to count copies instead of sheets.
Let me elaborate: If you copy one sheet of paper in duplex mode, I want the machine to count 2 originals instead of 1 original.
That's what that option that I'm pointing at on the copier/document server options does - but that option doesn't exist on the MPC range. How can I change it?
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
It Dosnt count originals like the bigger DFs do so there is no option it does pages or developments only.
Bookmarks