Thanks: 0
Likes: 0
Dislikes: 0
Dip Switches
Controller Board
DIP SW No.
OFF ON
1 Boot-up from FlashMemory Boot-up from SD card
2 to 8
Factory Use Only: Do not change the switch settings.
BICU Board
DIP SW No.
OFF ON
1 and 2
Factory Use Only: Do not change the switch settings.
Somebody help me about setting of the controller board DIP 2 TO 8 and BICU BOARD DIP 1 TO 2 function for MPC 2500
Regards
Last edited by hosennet; 01-17-2008 at 05:23 PM.
g
The standard procedure when you replace a PCB is to jott down or make sure the new PCB dip switches mirror that of the old board you are replacing.
The service manual will not explain anything thats done at a factory level.
- Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.
Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother
Reply With Quote
Bookmarks