Lanier 5222...

[JoshRountree]

I've got a couple of quick questions.

We have a Lanier 5222 that was jamming continuously so we quit using it. Now we're moving offices and I'm wondering if it's worth saving? Also, does this thing have a hard drive in it that I need to be concerned about wiping before I take it to the electronic recycler?

Thanks for any help, there's lots of smart people at this forum!

[sandmanmac]

I've got a couple of quick questions.

We have a Lanier 5222 that was jamming continuously so we quit using it. Now we're moving offices and I'm wondering if it's worth saving? Also, does this thing have a hard drive in it that I need to be concerned about wiping before I take it to the electronic recycler?

Thanks for any help, there's lots of smart people at this forum!

I wouldn't spend a nickel on that old box, It's very obsolete. While it's impossible to know the cause because we have no idea what type of jamming - it could be anything from a $5 seperation pad to a complete fuser rebuild, in the several hundred $$ range. Regardless of that, I'm sure it's in need of a few things.
As for the hard drive - if it had the print and/or scan feature, then probably 'yes'. If not, then 'no'
If you're concerned, remove the back panel and then remove the controller board on the top right (6-8 screws on a bracket). If there's a Hard drive, you'll now see it and be able to remove it easily

[JoshRountree]

I wouldn't spend a nickel on that old box, It's very obsolete. While it's impossible to know the cause because we have no idea what type of jamming - it could be anything from a $5 seperation pad to a complete fuser rebuild, in the several hundred $$ range. Regardless of that, I'm sure it's in need of a few things.
As for the hard drive - if it had the print and/or scan feature, then probably 'yes'. If not, then 'no'
If you're concerned, remove the back panel and then remove the controller board on the top right (6-8 screws on a bracket). If there's a Hard drive, you'll now see it and be able to remove it easily

Fantastic, thank you so much, exactly the info I needed.

Does anyone want this thing for parts, I think we have about 4 more in the same series. Located in northwestern NC.

[fshead]

thats the old ricoh 220..
as far as is it garbage i think depends on where you are and
your $$$$ status..
i have accnts in nyc throw away perfectly good machines
because they were 3 yrs old..
i often would take these and clean up and sell the..
as for jamming if its out of the tray and not making it to drum units
it might just need a good cleaning..
you should state where you are located and maybe someone here cld
wrk wth you..
a backup copier

[JoshRountree]

thats the old ricoh 220..
as far as is it garbage i think depends on where you are and
your $$$$ status..
i have accnts in nyc throw away perfectly good machines
because they were 3 yrs old..
i often would take these and clean up and sell the..
as for jamming if its out of the tray and not making it to drum units
it might just need a good cleaning..
you should state where you are located and maybe someone here cld
wrk wth you..
a backup copier

I just filled out my profile, I'm in Boone, NC.

I'll probably get rid of it unless I hear from someone, we are moving locations and I don't want to take it with us!

[TonerMunkeh]

Get it on ebay for parts, someone will always want one.