Since it feeds part way out of the tray, but he says it does not make it to the reg roller, I am assuming he marked the relay rollers (shrug).
Sooo....... my bet is on the relay clutch. And since you're in there, change the feed clutch too.
Since it feeds part way out of the tray, but he says it does not make it to the reg roller, I am assuming he marked the relay rollers (shrug).
Sooo....... my bet is on the relay clutch. And since you're in there, change the feed clutch too.
Dust on the paper tray exit sensor.
So, no more information is forthcoming. This thread is dead to me.
BCU board!? Really?
I am looking for a Service Manual for the MP2500.
I have access to Lexmark and Kyocera but I am Richo less
Ricoh MPC2500 fuser bearings??Got a Ricoh MPC2500 which has melted one of the plastic fuser bearings. Put in new bearing and melted it within 30 seconds of running machine. Strange thing is it has only done this on ONE BEARING the other side is fine!!! if it helps it is the right hand side bearing as the fuser comes out of the machine. Havn't changed the fuser sheet and is slightly crumpled on that side is it possible this is the problem but seems unlikely to me. Our Ricoh guy is still away so any help would be appreciated guys
Cheers 09822.jpg123457.jpg
Bookmarks