I've Ricoh Mp 9000
when I press Copy button it doesn't copy and i hear the motors turns and after few seconds it appears SC670
What should I Do ???????
Please help..!
I've Ricoh Mp 9000
when I press Copy button it doesn't copy and i hear the motors turns and after few seconds it appears SC670
What should I Do ???????
Please help..!
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Step 1: See this link: http://www.copytechnet.com/forums/ri...500-sc670.html
Step 2: Call a tech
Who wants a Hulka Burger?
you have a hard drive or controller problem, call for service if you don't have a contract get ready to pay big $
Have you checked SC history in SP mode? Any errors?
Try to reformat HDD - SP mode 5-832-001
If persistent - reinstall system/copy and engine firmware.
If you don't really know what that means - call service engineer. Good luck
Thanx for all for trying help me
I solve the problem by Changing the Laser Diode Board
and it works perfectly...
The sc670 is a jocker call condition like sc 990.
It appears any communication problem beethween two panel (BCU - IO )
Check out the all contact.
Bookmarks