Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Jun 2008
    Posts
    21
    Rep Power
    19

    MP-2852 Feeding first inch of sheet after print job is done.

    I have swapped rollers & torque limiter. I have cleaned and the swapped clutch with the bypass clutch. I have tried multiple paper sizes, orientations and levels. The machine consistently feeds the first inch of a sheet after it finishes a job. Any thoughts?


  2. #2
    Senior Tech 100+ Posts
    MP-2852 Feeding first inch of sheet after print job is done.


    Join Date
    Aug 2008
    Location
    Durango
    Posts
    107
    Rep Power
    20

    Re: MP-2852 Feeding first inch of sheet after print job is done.

    More questions than answers. Does the problem only occur w/ print jobs, not copies.
    Have you tried to duplicate the problem from another paper drawer feed.

    Copymutt


  3. #3
    Technician
    Join Date
    Jun 2008
    Posts
    21
    Rep Power
    19

    Re: MP-2852 Feeding first inch of sheet after print job is done.

    The problem only occurs from tray 1,on both prints and copies.


  4. #4
    Senior Tech 250+ Posts kannuki2's Avatar
    Join Date
    Feb 2012
    Posts
    382
    Rep Power
    0

    Re: MP-2852 Feeding first inch of sheet after print job is done.

    Try swap the whole pipe feed unit


  5. #5
    Senior Tech 100+ Posts
    MP-2852 Feeding first inch of sheet after print job is done.


    Join Date
    Aug 2008
    Location
    Durango
    Posts
    107
    Rep Power
    20

    Re: MP-2852 Feeding first inch of sheet after print job is done.

    Off timing of the feed clutch is controlled by the CPU. You have already ruled out a sticky clutch & paper drawer. Suggest you confirm same symptom on glass copy mode. I suspect it will be the same. SP 1903-2 controls the overfeed time of the feed clutch for tray 1.

    Copymutt


  6. #6
    Service Manager 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Posts
    3,185
    Rep Power
    71

    Re: MP-2852 Feeding first inch of sheet after print job is done.

    Is the machine detecting paper end correctly? I've had the actuator missing the last 1/8th inch off it where it drops into the sensor cause stupid issues like this.

    Computers are serious tools, Michael!

  7. #7
    Junior Member
    Join Date
    Oct 2012
    Location
    Shawnee
    Posts
    2
    Rep Power
    0

    Re: MP-2852 Feeding first inch of sheet after print job is done.

    Swap sensor on tray one. Think the part number is Aw010128. Toner gets inside on the sensor,then it does not turn off fast enough and keeps the pick up roller down.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here