MP2000 - Skewed output

[sandmanmac]

in duplex mode this equipment model prints first verse and then print the front, so check the duplex tickets roll son the side cover,because probably there that is generating the skew.

As I said, the "duplexed" side is always straight. The sample shows what happens on NON-duplexed

[gasino]

As I said, the "duplexed" side is always straight. The sample shows what happens on NON-duplexed

Ok..

makes a stop test, when the leaf out of the tray, open the side door and checks if it is bent.

does this with the registration roller and with the fuser.

[redneckstylin]

interchange duplex unit Is one of the gears sticking,is the unit walking,tire gummed up

just a idea seen these babys cause issues try reseating it back in there..