Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 31
MP 7500/SR841 TSB#021R2
I'm working on a SR 841 finisher with a broken staple tray, the parts manual is referring me to TSB#021R2. Could some helkp me out with that is referring to? Thanks in advance.
-
Re: MP 7500/SR841 TSB#021R2
What you are going to need is the actual staple tray its self, then there is a bracket which connects to the back of it, screws to connect the bracket to the staple tray, a bearing and a drive shaft which is twice as long as the current one.
If you still do not understand, refer to a SR5000 as all the modified parts are now located on these finishers.
-
Senior Tech
100+ Posts
- Rep Power
- 31
Re: MP 7500/SR841 TSB#021R2
OK Thanks, it broke right at that bearing, and it sounds like that bulletin was all the parts mods. Once again thanks.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks