also have put book and df reads back to factory specs
also have put book and df reads back to factory specs
The laser writes at different resolutions and powers to discharge the drum charges for prints and copies. Have u tried swap testing the laser or at least reseating the connectors to the laser on both ends? Might be a pinched wire somewhere, also.
jesus loves you! (everyone else thinks you're an assh*le)
street cred: CompTIA A+ & Network+ Certified; Konica Minolta Gold Seal x2,
Konica Minolta Outward ASSociate, Ricoh, Sharp, Lexmark trained
You have tried printing via USB and from your own PC outside of the client network? What about internal prints? Printer SP 1103-2 for colour test page.
internal print sp1103 is that blue grid pattern
auto color calibrations are the blue grid pattern aswell
Have you try a new Image Transfer Belt Ass'y? It has four charge rollers on it.
yup tried new itb unit
problem has ricoh tech support stumped now
Red, can you post more pictures.. I need individual color (Cyan, Yellow, Magenta, Blk) in single color mode using a scanner copy mode. Print a 1103 test pattern with 800 and 1200 dpi resolution and re-post it.
Is the Earth lead connector screwed to the correct screw (on the metal plate not the paper transfer unit) on the nearside of the Right handside door just under the paper transfer that can create a lot of weird issues.
Bookmarks