Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member rreasonover's Avatar
    Join Date
    Oct 2011
    Location
    texas
    Posts
    9
    Rep Power
    0

    C 811DN Double Image

    Replaced color pcu's and ITB unit, fuser and blk pcu. Unsure whats causing this. Any help welcome.
    Attached Files Attached Files

  2. #2
    Service Manager 5,000+ Posts
    C 811DN Double Image


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: C 811DN Double Image

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  3. #3
    Senior Tech 250+ Posts
    Join Date
    Sep 2012
    Location
    Turin
    Posts
    257
    Rep Power
    30

    Re: C 811DN Double Image

    Does the image remain double on the belt or it doubles exiting the fuser? Have you checked forced alignment of laser?

  4. #4
    Trusted Tech 50+ Posts
    C 811DN Double Image

    arahael's Avatar
    Join Date
    Mar 2013
    Posts
    94
    Rep Power
    23

    Re: C 811DN Double Image

    go service mode, then do copy sp, 2111, b, c,

  5. #5
    Service Manager 2,500+ Posts
    C 811DN Double Image

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,885
    Rep Power
    159

    Re: C 811DN Double Image

    Quote Originally Posted by arahael View Post
    go service mode, then do copy sp, 2111, b, c,
    x 2 on that (Line position adjustment)
    But the order is actually 2111-3 (rough), and then 2111-2 (fine)

  6. #6
    It's not easy being green 1,000+ Posts Cipher's Avatar
    Join Date
    May 2006
    Posts
    1,309
    Rep Power
    57

    Lightbulb Re: C 811DN Double Image

    I'm not so sure that's a colour reg problem looking at the sample, it looks more like fusing offset.

    How thick is the paper stock are you using?
    Have you set the printer and print driver settings to the correct paper thickness setting?

    Could also be a printing error, sometimes layers in PDF file can cause weird over lap problems.
    Try exporting to different format or printing the file as a image.
    • Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.

    Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother

  7. #7
    Field Supervisor 2,500+ Posts
    C 811DN Double Image

    Jomama46's Avatar
    Join Date
    Apr 2008
    Location
    Fairfax, VA
    Posts
    2,900
    Rep Power
    66

    Re: C 811DN Double Image

    Run a black copy, that will tell you if its fuser or color reg.

    You never realize how cheap a professional is until after you let an amateur do it.
    A+; Network +; PDI+

  8. #8
    Senior Tech 2,500+ Posts
    C 811DN Double Image

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    2,920
    Rep Power
    99

    Re: C 811DN Double Image

    Quote Originally Posted by Cipher View Post
    sometimes layers in PDF file can cause weird over lap problems.
    Try exporting to different format or printing the file as a image.
    I agree with this. Some boxes on the document are fine. Is this the only document they are having this kind of problem with?
    NEVER ASSUME ANYTHING

  9. #9
    Not a service manager 2,500+ Posts Iowatech's Avatar
    Join Date
    Dec 2009
    Location
    Iowa
    Posts
    3,933
    Rep Power
    97

    Re: C 811DN Double Image

    The line adjustment looks like it might help, the adjustment is pretty easy and you won't wreck anything by doing it even if it is unnecessary.
    But it might be more helpful to upgrade or change the print driver, as it looks like the current print driver simply doesn't understand that concave font. If you can find it for this machine, get the latest RPCS driver. Otherwise, swap PCL 5 for PCL 6, or vice versa. Either way, make sure the driver you use is the latest version from the public Ricoh site.
    (My experience with the "Universal PCL" driver has not been consistent enough for me to have a take on it. A good deal of the time it does works perfectly, but from time to time it has frustrated me to the point that I'd like to hit it with an axe. And that's probably just me, too, I'm probably doing something wrong. So check with others here if you want to use it, it could work.)

  10. #10
    Glorified Parts Swapper 100+ Posts ptrflrs's Avatar
    Join Date
    Dec 2010
    Location
    San Antonio
    Posts
    192
    Rep Power
    32

    Re: C 811DN Double Image

    Quote Originally Posted by sandmanmac View Post
    x 2 on that (Line position adjustment)
    But the order is actually 2111-3 (rough), and then 2111-2 (fine)
    X3 on forced line adjust, BTW I've been told repeatedly by ricoh tech support to run "C" then "A" skipping "B" entirely but I have had good results in different orders. It is weird that some of the dark But not full black text looks fine.
    jesus loves you! (everyone else thinks you're an assh*le)
    street cred: CompTIA A+ & Network+ Certified; Konica Minolta Gold Seal x2,
    Konica Minolta Outward ASSociate, Ricoh, Sharp, Lexmark trained

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here