Thanks: 0
Likes: 0
Dislikes: 0
Thanks for looking in.
In particular to Doc Feeder DF3000, I replaced rollers and belt, when scanning at about the 10th pg. jams and there is a sheet under doc feeder with a about in inch
fold from trail edge.
Before I dismantle this unit I was wondering if there is anything you guys can point to which may correct this.
Thanks..............
Trail edge? I'd replace the Torque limiiter along with the sep roller
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
"JOMAMA" I Love It!
Hey would you have a part # for Torque Limiter? I may have missed it. I did replace Sep Roller.
A294-6700. Good Luck
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+
I did miss that one. Replaced many of those on HP Printers.
Thanks again man you're an ace.
I would go back with a clutch. I haven't seen this model for a long time but those clutch always slipped on this model.
Reply With Quote
Bookmarks