Thanks: 0
Likes: 0
Dislikes: 0
Hello All,
I have replaced a fuser web in a Lanier LD370 but the "replace fuser web" message keeps popping up. I am able to clear it temporarily but uit returns a short time later. I enter service mode and go into 1) Feed and clear the counter for web motor. The machine comes to ready and works for a while but then the message returns. Does anyone have any suggestions for me?
Thanks
Make sure you have positioned the web end sensor correctly.
And make sure the acuator is not broke off or bent from heat. Reset the web counter, not the web motor!Originally Posted by ruben
Testing 1-2-3, testing, testing. Is this thing on?
Reply With Quote
Bookmarks