Dislikes:
0
-
-
Re: Mpc3001 acc sheet
Check the settings on the birth certificate and verify that everything is as it should be.
-
Trusted Tech
50+ Posts
- Rep Power
- 32
Cheers... Tried that and also nvram cleared, no joy
-
Re: Mpc3001 acc sheet
Have you tried to recall the factory acc settings? When doing this it only affects the copy side of acc anyway.You may also have to do manual colour calibration, mode c first and then mode a x2.Then try the maintenance acc again.Normally when settings are way out the maintenance option does not work and one is forced to use the sp mode option.Do SP2-111-003 (Mode c: rough adjustment).2. Use SP2-194-007 to check if the result of the line position adjustment is correct(0: Completed successfully, 1: Not completed). If the result is "1", refer to‘Countermeasure list for color registration errors’.3. Do SP2-111-001 (Mode a: fine adjustment twice).4. Use SP2-194-007 to check if the result of the line position adjustment is correct(0: Completed successfully, 1: Not completed). If the result is "1", refer to‘Countermeasure list for color registration errors’.5. Put some A3/DLT paper on the by-pass tray.• When you print a test pattern, use the by-pass tray to feed the paper.6. Print out test pattern "7" with SP2-109-003.7. Check the printed output with a loupe.8. If there are no color registration errors on the output, the line position adjustmentis correctly done. If not, refer to the countermeasure list for color registrationerrors.
-
Trusted Tech
50+ Posts
- Rep Power
- 32
Thanks for the well thought out reply, its not line position though...
-
Re: Mpc3001 acc sheet
Have you reseated the RAM? In fact, what have you done?
-
Trusted Tech
50+ Posts
- Rep Power
- 32
Push / pull everything on controller... Dimms... Cleared nvram twice...
-
Re: Mpc3001 acc sheet
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
-
Senior Tech
250+ Posts
- Rep Power
- 0
Re: Mpc3001 acc sheet
Does it do the same when you copy in Black/White and single color? If it's happening in full color copy then check the SBU settings from the birth certificate.
-
Senior Tech
250+ Posts
- Rep Power
- 0
Re: Mpc3001 acc sheet
Just a FYI, my team leader has this famous saying when we ran into tough problem with a color box, "replace all suspect parts BEFORE you perform a NVRAM clear, use it as a last resort." I regret it when I first start working on a C2500 and did a CRAM without a birth certificate. The machine ended up sent back to the warehouse and it took him a few weeks to fix it.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks