I have a couple MPC5502's with the belt migrating to the front of the machine and will then rip. We have replaced the ITB assy along with the cleaning unit and the PTR. Belt migrates again. Machine is level, side door closing properly, nothing looks out of place.It is a higher volume location (60k black and 23k CMY/month) most of which is 17". If you catch it early you can release the belt tension and move the belt back. The belt rides up on the roller so the rubber edge is not keeping it centered. Of course this machine is at a fly in mine site and I only come once a month... Ideas?
Bookmarks