Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    supervisor unitechro's Avatar
    Join Date
    Feb 2012
    Location
    lyon
    Posts
    9
    Rep Power
    0

    Ricoh mpc5000 electronic counter no grows up

    hi guys,

    MPC5000 electronic counter no grows up even if i make copy?

  2. #2
    Field Supervisor 2,500+ Posts
    Ricoh mpc5000 electronic counter no grows up

    Jomama46's Avatar
    Join Date
    Apr 2008
    Location
    Fairfax, VA
    Posts
    2,900
    Rep Power
    66

    Re: Ricoh mpc5000 electronic counter no grows up

    Which counter are you looking at? UT or SP?

    You never realize how cheap a professional is until after you let an amateur do it.
    A+; Network +; PDI+

  3. #3
    Not a service manager 2,500+ Posts Iowatech's Avatar
    Join Date
    Dec 2009
    Location
    Iowa
    Posts
    3,933
    Rep Power
    97

    Re: Ricoh mpc5000 electronic counter no grows up

    Quote Originally Posted by unitechro View Post
    hi guys,

    MPC5000 electronic counter no grows up even if i make copy?
    Can you post a picture of how the copies look now?

  4. #4
    supervisor unitechro's Avatar
    Join Date
    Feb 2012
    Location
    lyon
    Posts
    9
    Rep Power
    0

    Re: Ricoh mpc5000 electronic counter no grows up

    hi,

    in menu user tools/counter/123 counter:

    we have electronic counter dev counter or page counter (5.045.0 or 1),if i do one copy this counter must be + 1 .
    but it doesn t work,if i go in user tools/printer features/ print config ;by PC to printer :same problem.
    no problem with quality or density .

    electronic counter in menu user tools/counter/123 counter seems blocked.
    client must send me 5.990 all ,i wait to see 7.803/7.804/8001 etc...

    firmware version? controller nvram defect?

  5. #5
    Field Supervisor 2,500+ Posts
    Ricoh mpc5000 electronic counter no grows up

    Jomama46's Avatar
    Join Date
    Apr 2008
    Location
    Fairfax, VA
    Posts
    2,900
    Rep Power
    66

    Re: Ricoh mpc5000 electronic counter no grows up

    Quote Originally Posted by unitechro View Post
    hi,

    in menu user tools/counter/123 counter:

    we have electronic counter dev counter or page counter (5.045.0 or 1),if i do one copy this counter must be + 1 .
    but it doesn t work,if i go in user tools/printer features/ print config ;by PC to printer :same problem.
    no problem with quality or density .

    electronic counter in menu user tools/counter/123 counter seems blocked.
    client must send me 5.990 all ,i wait to see 7.803/7.804/8001 etc...

    firmware version? controller nvram defect?
    Is SP5045 at "1"?
    I dont thinks its the NVRAM because 5990 is working. Controller maybe.

    You never realize how cheap a professional is until after you let an amateur do it.
    A+; Network +; PDI+

  6. #6
    supervisor unitechro's Avatar
    Join Date
    Feb 2012
    Location
    lyon
    Posts
    9
    Rep Power
    0

    Re: Ricoh mpc5000 electronic counter no grows up

    Quote Originally Posted by Jomama46 View Post
    Is SP5045 at "1"?
    I dont thinks its the NVRAM because 5990 is working. Controller maybe.


    hi jomama,

    5.045 is to 0 (initial position) cause i ve page counter.
    client must send me 5.990 all ;tomorow .i ll see all 7.803.804 and 8 menu to verify all counter) .at frist i ll put 5045 0 to 1 (to have development counter and see if it moves) and try to insert (another time) firmware copy/system and engine ( we ve last firmware in machine).i think problem come from firmware up date or controller nvram fault.

  7. #7
    Field Supervisor 2,500+ Posts
    Ricoh mpc5000 electronic counter no grows up

    Jomama46's Avatar
    Join Date
    Apr 2008
    Location
    Fairfax, VA
    Posts
    2,900
    Rep Power
    66

    Re: Ricoh mpc5000 electronic counter no grows up

    5945 to 0 means it will count development cycles not copies. However it should still be "growing"
    If you changed it back to 0 after being at 1, that may be the problem. I have never encountered it but the manual says you can only change it one time. You may have to replace the controller and NVRAM.

    You never realize how cheap a professional is until after you let an amateur do it.
    A+; Network +; PDI+

  8. #8
    supervisor unitechro's Avatar
    Join Date
    Feb 2012
    Location
    lyon
    Posts
    9
    Rep Power
    0

    Re: Ricoh mpc5000 electronic counter no grows up

    Quote Originally Posted by Jomama46 View Post
    5945 to 0 means it will count development cycles not copies. However it should still be "growing"
    If you changed it back to 0 after being at 1, that may be the problem. I have never encountered it but the manual says you can only change it one time. You may have to replace the controller and NVRAM.
    hi,

    thk for your help jomana46

    the technical dealer send us 5.990.1 ( we re broker,and we compare it with our original sp5.990.all, we have it for each copier sold ) :

    we find 5.045 to 2 ???? and they say :they 're technical and dealer :
    i don't known why they put to 2 sp 5.045 : they said it was in order to have counter copy with % for color and black
    they re supposed to be "real technicals" and supposed to open technical manual to see that to put 2 doesn't existed .and see all they want in sp menu 8.

    results:
    All counter in 7.804 ok
    All counter in 8 ,user menu counter ,printer config counter fault.

    it s their own responsability ,we will probably sell them nvram and controller.

    i ll post final result

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here