Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
250+ Posts
- Rep Power
- 34
Intermittent service codes on MP301
Hi Guys
Has anyone come across MP301 that will intermittently give SC144. Switching the machine off for a few minutes fixes it for a while.
I have check all cabling of the board and the ribbon cables
I have also updated the firmware.
In the sc history i also find that the machine has gone into SC 101 and sc 141
I do not have another machine so i can swap some of the boards and i have to make sure i order the right boards as they are obliviously very expensive
-
Re: Intermittent service codes on MP301
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
-
Re: Intermittent service codes on MP301
SC101 : The scanner has scanned the white plate but can not detect the white level.
SC141 : Automatic adjustment has failed to correct a current black level to the certain level.
I would say a defective SBU.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks